Semiconductor Industry Weekly Report | AI Reshuffles Investment Priorities; Hybrid Bonding and Glass Substrates Become New Battlegrounds

Oct 19,2026

Key Summary

This week, AI is reshaping priorities in semiconductor investment, with chip performance gains increasingly reliant on interconnect and integration technologies. Optical communications and advanced packaging have emerged as key investment areas, while hybrid bonding, TSV/TGV, silicon photonics, and heterogeneous integration continue to gain traction. North Huachuang acquired Nuohexinwei for 405 million yuan, ramping up its capabilities in hybrid bonding equipment; Xiaomi invested 100 million yuan in Suzhou Keyang to enter the TGV market. ASML’s Q3 net profit rose 133%, with lithography tool demand booked through 2030. ChangXin’s G5 mass production has drawn global attention, lifting its DRAM market share to 10%. Yuexin Semiconductor listed on the ChiNext board, surging 274% on its debut. The silicon carbide sector is attracting intense capital interest, and Changfei Advanced has launched its IPO.

I. Macroeconomic Developments

SIA warns of vulnerabilities in the U.S. chip supply chain: By headquarters location, 95% of Tier‑1 equipment and materials originate in the United States, Europe, and Japan, but this share drops sharply to 68% when measured by actual production sites. More than one-third of upstream raw materials are classified as “high risk,” including 13 rare earth elements as well as gallium, germanium, and graphite, with production capacity concentrated mainly in China or Russia. Supplies of xenon gas, helium, advanced packaging equipment, ABF substrates, and photomask substrate materials are highly concentrated.

Trump stated that the United States will control 50% of chip production capacity: On October 14, Trump said he had just spoken by phone with TSMC Chairman Morris Chang. TSMC’s investments in the U.S. have reached $265 billion, and Chang confirmed that a team would be sent to Texas to assess the investment. On the same day, GlobalFoundries announced that Japan would provide up to $21 billion to build two new fabs in New York State, with the first beginning production in 2029. Applied Materials unveiled its $5 billion EPIC R&D center.

II. Developments at Leading/End-User Companies

TSMC’s Q3 results were stellar: consolidated revenue reached NT$1.49424 trillion (+50.9%), and net profit stood at NT$763.06 billion (+68.7%). 2nm accounted for 8% of wafer sales (up from 3% in Q2), 3nm for 33%, and 7nm and more advanced nodes together represented 79%.

ChangXin Technology Achieves DRAM Breakthrough: LPDDR6 Makes Its Global Commercial Debut in Xiaomi’s 18 Fold Folding Flagship; the G5 platform has entered formal mass production, with an active-region half-pitch of 11.95 nanometers in the memory array and a more than 50% increase in die yield per wafer compared to the previous generation. The company also unveiled its 4F2 architecture and its self-developed VSG vertical surround-gate transistor technology. According to Counterpoint estimates, its global DRAM revenue share will rise from 4% in Q2 2025 to 10% in Q2 2026, making it the world’s fourth-largest DRAM vendor.

Yuexin Semiconductor listed on the ChiNext board: “Guangzhou’s first chip” debuted at an issue price of RMB 12.01, surged 274.69% at the open on its first day, and reached a market capitalization of RMB 129.5 billion. The company focuses on analog and mixed-signal chips, spanning process nodes from 180nm to 55nm, and has accumulated over 200 customers.

Explosion at Intel’s Israeli Fab: On October 14, an explosion and subsequent fire occurred at the company’s plant in Kiryat Gat, southern Israel, leaving three people seriously injured; initial investigations suggest the incident may have been linked to a gas cylinder explosion.

The controlling shareholders of Sanan Optoelectronics have been subject to bankruptcy reorganization applications: Sanan Electronics and Sanan Group have been petitioned for bankruptcy reorganization by creditors. Together, they hold 26.30% of the company’s shares; cumulatively, 60.52% of their holdings are pledged, and their shareholdings have been placed under judicial freeze.

Huawei’s Tao Law is moving toward practical implementation in consumer devices: On October 15, Huang Yu, Huawei’s chief scientist for semiconductor EDA, stated that Tao Law comprises four layers, with the greatest challenge lying in EDA tools. In October, Huawei launched its Mate 90 series, which features the Kirin 9050 Pro chip across the lineup—built on the “logic folding” technology derived from Tao Law—marking the transition of Tao Law from theory to real-world product deployment.

III. Semiconductor Equipment and Materials

Global spending on 300mm equipment will reach US$149 billion in 2026, a year-on-year increase of 31% according to SEMI forecasts, and is expected to rise to US$227 billion by 2029. In 2026, 20 new 300mm fabs or production lines will begin construction worldwide, with 18 more starting up in 2027.

ASML’s Q3 results exceeded expectations: revenue reached €11.7 billion, and net profit was €4.96 billion (+133%). Some customers have already expressed intent to place orders for 2029 or even 2030, and supply in 2027–2028 will fall short of demand. The share of shipments to mainland China jumped from 14% to 23%.

ASML Implements a Uniform 10% Price Increase for Components: Starting in January 2027, ASML plans to raise the prices of replacement parts for EUV and DUV lithography machines supplied to South Korea by 10%, affecting Samsung Electronics and SK Hynix.

Applied Materials’ EPIC R&D Center Unveiled: Built in Sunnyvale, California, with an investment of approximately $5 billion; TSMC is a key partner, and the two companies will collaborate on advanced logic processes, new materials, 3D transistors, and interconnect architectures.

NAURA Technology acquires Nuohai Keywei for RMB 405 million: stepping up its investment in hybrid bonding equipment. Nuohai Keywei has built up technical expertise in core areas such as optical alignment and compensation algorithms; its shipped equipment already achieves nanometer‑level alignment precision and has secured repeat orders.

AMC increases its investment in Qinghe Jingyuan: Its wholly owned subsidiary plans to inject up to RMB 35 million, resulting in a combined stake of 7.0718% after the capital increase. Qinghe Jingyuan’s pre-money valuation is RMB 6.75 billion, and it positions itself as a provider of advanced semiconductor bonding and integration technologies and solutions.

Tuojing Technology’s net profit surged 1,324% in the first half: revenue reached RMB 2.913 billion (+49.06%), and net profit attributable to owners of the parent was RMB 1.343 billion (+1,324.1%). Hybrid bonding has entered mass production, and contract liabilities stood at approximately RMB 5.131 billion in the first half, nearly 1.8 times the company’s revenue for the same period.

Xinyuan Micro’s front-end equipment revenue share has increased significantly: In the first half of the year, revenue reached RMB 897 million (+26.47%), with front-end cleaning accounting for over 30% of revenue, and its front-end spin coater/developer machines securing orders from leading domestic logic, memory, and power‑device customers.

The first SiC thinning machine from CETC Equipment has entered mass production: the company’s independently developed fully automated silicon carbide device wafer thinning machine has been successfully delivered to a leading domestic wafer manufacturer and is now in mass production.

Construction Begins on Tachikawa Semiconductor Equipment Facility: With a total investment of RMB 1.05 billion, the first phase is expected to produce 500 units of fully automated probe stations for 8-inch and 12-inch wafers and 100 sets of wafer grinding equipment annually upon completion.

Nikon has unveiled its advanced packaging digital exposure system, the DSP-110, which boasts a resolution of 1.5 microns and can process 72 panels per hour—approximately 40% faster than the DSP-100. The system is expected to launch in April 2027.

Weidao Nano Enters the PVD Market: The company has launched two new PVD products featuring a modular design, enabling a single system to meet diverse application and technology-node requirements. As of June 2026, its backlog of semiconductor equipment orders has reached RMB 2.698 billion.

The first mask substrate defect inspection system from Yuwei Semiconductor has been delivered: the Halo-300 has officially shipped to a leading domestic mask substrate customer, marking a critical step toward the industrialization of domestically produced mask substrate defect inspection equipment.

Yac Technology injects RMB 1.789 billion into its photoresist platform: Its subsidiary, Jiangsu Yarui, is raising capital through a share increase, partnering with investors including Zhaoyin Capital and CITIC Securities Investment to accelerate breakthroughs in advanced semiconductor materials.

Sukos Completes Tens of Millions Yuan in Series A Funding: Focusing on TGV electroplating equipment, the company has secured formal production-line orders from leading domestic customers and completed deliveries, with shipments exceeding eight sets by 2025.

IV. Glass Substrates and Advanced Packaging

Xiaomi invests RMB 100 million in Suzhou Keyang: Xiaomi’s Intelligent Manufacturing Fund and the Shanghai Semiconductor Materials Fund II each contribute RMB 100 million to acquire an 8% stake, valuing the company at approximately RMB 1.24 billion. Suzhou Keyang ranks among the top three globally in TSV advanced packaging, operating full‑size wafer‑level packaging lines for 4-, 6-, 8-, and 12‑inch wafers, and has demonstrated a glass interposer with an AR ratio of 1:10, a via diameter of 20 μm, and a board thickness of 200 μm.

Honglei Optics has signed bulk orders for TGV direct-write lithography systems: it has launched three micro- and nano-scale direct-write lithography tools, focusing on three major application areas—PCB HDI and FPC boards, semiconductor glass substrates, and advanced packaging reticles.

Haiji Semiconductor has initiated planning and site selection for an industrialization base for ultra-large TGV substrates: the world’s first full-process 4.5-generation TGV production line will be completed in five months, using 730mm × 920mm glass substrates and featuring over 95% domestic equipment localization.

GlobalFoundries and TSMC have reached a $2 billion manufacturing agreement: initially for five years, it will expand capacity at GlobalFoundries’ Malta, New York facility and provide silicon interposers for TSMC’s CoWoS advanced packaging, with production volumes expected to ramp up gradually in the first half of 2028.

V. Optical Communication and Optical Interconnection

Lumentum’s capacity is largely booked through early 2029: The CEO revealed that production for certain AI photonics components is essentially fully committed through early 2029, and for some products, about 70% of demand in 2027 will remain unmet. This year, NVIDIA has invested $2 billion each in Lumentum and Coherent.

Nanghe Technology’s IPO on the STAR Market has been approved: the silicon photonics chip company, established just five years ago, reported revenue of RMB 461 million in 2025 and exceeded RMB 569 million in the first half of 2026. As of the end of August, its backlog of orders stood at RMB 4.551 billion, with 800G and 1.6T products accounting for 73.57% of the order mix.

Guoji Nanfang and Institute 55 have achieved breakthroughs in optical chip technology: independently developed high-power indium phosphide lasers, high-speed thin-film lithium niobate electro-optic modulators, and high-speed indium phosphide photodetectors have realized key technological advances, establishing a complete end-to-end process from design and fabrication to packaging and testing.

Wuhan Tianyuan is diversifying into indium phosphide: it plans to invest in the Chuxiong High-tech Industrial Development Zone to build a production base with an annual capacity of 200 tons of 6N/7N-grade high-purity indium and 100 tons of polycrystalline indium phosphide, with a total planned investment of approximately RMB 500 million.

Guangku Technology acquires AJX for RMB 1.64 billion: AJX specializes in passive optical communication components and has established long-term partnerships with leading customers such as InnoLight, FiberHome, and Hisense Broadband. Its products are used by end‑users including NVIDIA, Google, Amazon, and Cisco.

Guangzhi Technology has secured orders from leading global customers for its 6-inch indium phosphide substrates: the indium phosphide substrate business has entered volume production and delivery, with domestic customers including top optical chip companies, and overseas shipments have begun in volume to a leading optical communications firm.

Yunnan Germanium’s indium phosphide wafer orders are robust: market demand is strong, the order backlog is ample, specifications range from 2 to 6 inches, and customers include prominent domestic and international downstream manufacturers.

The “Hetao Line” optical chip platform at Pengcheng Laboratory has been commissioned: its full name is the “Ultra-High-Capacity Optical Communication High-Performance Heterogeneous Integration Optical Chip Process Platform,” with a focus on breakthroughs in key technologies such as silicon photonics chips, multi-material heterogeneous integration, and wafer-level bonding.

Kunyou Optoelectronics has closed a C+ round of financing exceeding RMB 1 billion, bringing its total funding to over several billion yuan. Investors include Huawei Hubble, Yunfeng Fund, Shanghai Guotou, and TCL Capital. The company’s RMB 2 billion investment in a 12-inch wafer-level optics production line in Shanghai Lingang is expected to be completed and commissioned by 2027.

Yole: MicroLED is expanding from living rooms to AI data centers: MicroLED has diversified into three major applications, with the industry’s focus shifting toward two silicon-based segments. CPO optical engine revenues are projected to exceed $112 billion by 2031, with scale-up applications alone accounting for approximately 94% of the market.

Guangqingyuan’s MicroLED optical interconnect achieves a bandwidth of 37 Gbps: system bandwidth is boosted through space-division multiplexing and wavelength-division multiplexing, with a 4×4 green-light Micro-LED array operating simultaneously across 16 channels to realize 37 Gbps transmission. Long-wavelength InGaN Micro-LEDs attain a transmitter energy efficiency of 0.056 pJ/bit; this work was selected as an Editor’s Highlights article in Nature Communications.

VI. Third/Fourth-Generation Semiconductors

Fangzheng Microelectronics showcased its full range of SiC solutions at the Bay Area Semiconductor Exhibition, unveiling a DIP32 silicon carbide power module. 8-inch SiC production capacity is expected to reach 8,000 wafers per month in Q2 2027, and 2026 will mark the breakthrough year for SiC applications in the AIDC sector.

A 5.7-billion-yuan diamond project has been signed in Ordos: a project with an annual output of 6 million carats of diamonds and semiconductor application products, building a complete product chain from diamond synthesis, cutting, grinding, and polishing to semiconductor applications. Upon reaching full production capacity, annual sales revenue is expected to reach 2.3 billion yuan.

YOFC Advanced’s IPO project has officially launched: the company has established a silicon carbide industry base in Wuhan with total investments exceeding RMB 20 billion and has built an integrated full‑chain capability spanning epitaxial growth, device and module design, wafer fabrication, and module packaging and testing. Its two major bases in Wuhu and Wuhan together have an annual production capacity of 420,000 silicon carbide wafers, and over the past two years the company has raised nearly RMB 4.8 billion in cumulative financing.

New financing updates from four silicon carbide companies: Xindongneng Semiconductor has closed a Series A round exceeding RMB 100 million, with cumulative shipments of automotive-grade modules surpassing 3.8 million units; Silcore Micro has completed a Series B round worth several hundred million yuan, and its Chengdu facility has rolled off its first 8-inch wafer; Feimi Electric has raised a total of RMB 170 million; and Xinfufa is advancing an RMB 8 million angel-round financing.

Deye Co., Ltd.’s procurement needs exceed RMB 18 billion by 2027, with a CAGR of 66.8% from 2024 to 2027. The company is transitioning its inverter products from conventional silicon-based technology to silicon carbide technology, and its partners include Sanan Semiconductor, Lingrui Semiconductor, PineJ Semiconductor, CR Micro, Wolfspeed, and others.

Significant technological breakthroughs in 12-inch and 14-inch silicon carbide: At Hantian Tiancheng, the thickness non-uniformity of 12-inch SiC epitaxial wafers has improved from 7.68% to 1.72%, and small-batch orders have been secured; at Shanxi Tiancheng, the effective thickness of 14-inch silicon carbide single crystals has reached 30 mm, with 90% of equipment components now domestically produced; and at Lijing Xinkexin, the AI-assisted growth system for 12-inch silicon carbide single crystals has successfully achieved ignition.

Tinggan Technology’s Hefei Silicon Carbide Manufacturing Center Has Begun Operations: It took less than a year from project approval to the rollout of the first product. NIO has jointly established an automotive-grade power semiconductor joint laboratory with Tinggan Technology.

Wolfspeed has secured a $1.5 billion loan commitment from the U.S. Department of Defense: it plans to provide up to $1.5 billion in 30-year long-term financing for domestic R&D and production of silicon carbide materials and wide-bandgap power devices in the United States.

Jingneng partners with Wolfspeed for deep integration of automotive-grade SiC: Jingneng’s next-generation power module platform will prioritize the adoption of Wolfspeed silicon carbide bare dies, initially deployed in inverters for new-energy vehicles. Wolfspeed has committed to developing customized bare dies that meet Jingneng’s performance specifications, and its 8-inch single-chip solution can reduce costs by approximately 30% compared to 6-inch chips.

Aikewei Semiconductor Equipment continuously monitors cutting-edge industry trends, providing in-depth market insights and technical support. See you next time!

Note: This report is compiled based on publicly available information and does not constitute investment advice.